Fast Electric 50 amp controller

click photo for PDF 149 kB

Remote arming/disarming ability

Variable throttle span and zero point

Switchable Battery Elimination Circuit

0 to 26 Volt range (7-26 with B.E.C.)

Low loss 0.0015 ohm FET output

overload protected

glitch-free with a poor radio signal

AUDIBLE Arm Status and thermal trip

VISIBLE Throttle/Radio/Thermal Cutout

smooth high frequency operation

Dimension 53 x 30 x 13 mm

operates glitch-free with a poor radio signal

SETUP

Throttle lever position

To align the controller to your throttle lever..... position the throttle below.	Then give the *SETUP* button
zero throttle point	one press
maximum throttle point	two presses

Disarm mode setup

Hold the setup button... After two seconds the four lights flash sequentially Release on the flashing colour below.	For disarming on...
RED	*ALWAYS ARMED* (default reset setting)
YELLOW	Battery disconnection
GREEN	Battery disconnection 2.5 seconds of radio failure
INTENSE RED	Battery disconnection 1.4 seconds of radio failure

To reset to default : press SETUP with transmitter off

To arm the throttle : reverse stick for 2 seconds

INDICATORS

STATUS VISIBLE INDICATION AUDIBLE INDICATION
RADIO FAILURE	RED indicator light
UNARMED	INTENSE RED light	continuous chirps
TEMPERATURE CUTOUT	lights flashing alternately	double chirps
THROTTLE	YELLOW brightness = power
MAXIMUM THROTTLE	YELLOW flashing